GEA Delbag Фильтрующие патроны

Патроны с активированным углем крепятся в опорных рамах центральных установок кондиционирования. Патроны гарантируют большой контакт с поверхностью и с поперечным сечением потока воздуха. Данный фильтрующий элемент можно заменить или заправить заново. Фильтрующие патроны применяются в системах для кондиционирования воздуха для поглощения вредных газов и примесей.

Более подробную информацию о продукции Вы можете скачать вDownload Center.

Пластик

  • Эти патроны с активированным углем представляют собой перфорированные прямые пластмасовые цилиндры.
  • Внутреннее пространство патрона заполнено активированным углем.

Сталь

  • Патроны с активированным углем состоят из перфорированных цилиндров из листовой или нержавеющей стали.
  • Активированный уголь может быть заменен.

GEA MultiPuls-W pulse-filter cartridges – dedusting,
Filter category L and M (Filter classes F8, F9)
With pulse-filter cartridge MultiPuls-W, the filter insert, which contains no metals, is separate from the cartridge components that contain metal. The cartridge insert, which can be fully incinerated, is exchanged – but the valuable, coated supporting basket can be further used.
For use in the GEA EuroJet cartridge dust collector, the filter cartridge has a bayonet fastening.
The following standard filter media are available for selection: cellulose, polyester, conductive polyester, and meltblown.

GEA cartridge filters are pleated surface filters that are folded in a star shape. They can be cleaned for further use. They are designed for application in high concentrations of pollutants, to ensure reliable filtration and separation of dry dust and smoke, especially as encountered in the metalworking industry.
An extensive selection of fastening elements, standard media, and equipment versions is available.


GEA MultiPuls-W/F pulse-filter cartridges – air intake systems, Filter classes F8, F9
Air flow: 1,200 m³/h – 144,000 m³/h
Areas of application: Separation of odors and gaseous pollutants
GEA cartridge filters, with their star-shaped, pleated surface filter elements that can be cleaned for further use, have been especially designed for severe dust loads, especially as they occur in arid zones of the earth. They are highly effectively employed for optimal treatment of the intake air for gas turbines, compressors, and motors.

MultiPuls pulse-filter cartridges are available in models –W and –F for use in intake-filter systems.

With pulse-filter cartridge MultiPuls-W, the filter insert, which contains no metals, is separate from the cartridge components that contain metal. The cartridge insert, which can be fully incinerated, can be exchanged – but the valuable, coated supporting basket can be further used. Delbag filter-exchange procedures can be provided for all typically available modes of exchange: for example, with fastening by bayonet closure, crank, tripod, or direct threaded connection. Available standard filter media are cellulose, polyester, and meltblown.

The solidly cast MultiPuls-F pulse-filter cartridge in its standard version is pressed against the bottom of the cartridge by a screw fastening.


GEA MultiPuls-WT depth filter cartridges, Filter classes F9, H11
GEA MultiPuls-WT depth filter cartridges are employed instead of pulse filters (surface filters) wherever the dust concentration is lower than 0.2 mg/m³, or when relative humidity is very high and the use of retention filters (depth filters) is advisable.

The basic design of MultiPuls-WT depth filter cartridges corresponds to that of MultiPuls-W pulse filter cardridges, but the depth filters feature special fiber-glass materials as filter medium. As protection, prefilter bag cartridges made of special synthetic fleece are used. GEA depth filter cartridges have a star-shaped, pleated filer medium. They are used with moderate dust loads and small particle sizes for optimal cleaning of the intake air for gas turbines, compressors, and motors.